 |
| CLICK IMAGE FOR CLOSER LOOK |
Anti-Theft
device for use with the ATTx V2 Receiver and ATT Mini Receiver. Simply wire
the Car Pager either into your car alarm or directly into the car's ignition
circuitry or alternatively it may be used with the ATT Ultrasonic Sensors.
Car Pager Operation:
The unit is activated when your car door is opened. Once triggered the pager
unit will transmit signals to the ATTx V2 Receiver which sends the receiver
into 'Alarm Mode'. The unit will transmit the signals three times, then
pause for an hour, then re-transmit the signals again after an hour. This
process is repeated until the pager unit is reset. Turning on the vehicle
ignition will reset the pager unit.
If the optional Ultrasonic Sensors are fitted, the pager will also be
triggered if your vehicle window is smashed.
ATTx V2 Receiver Alarm Mode - The Receiver will continuously emit a
siren-like tone lasting for 5 seconds as well as flashing all the LEDs
simultaneously. To stop the siren tone (and cancel Alarm Mode) tap the
Receiver Button once. The Receiver will revert back to it's normal mode of
operation.
Mini Receiver Operation - When triggered by the Car Pager, the Mini
Receiver is activated and will vibrate and beep 5 times. Pressing the 'L'
button will de-activate the Mini Receiver for 15 minutes. After the 15
minute period the Mini Receiver will be re-activated and continue normal
use.
| Ordering
Information |
| Code |
Description |
Our Price |
Purchase |
| ATTPT |
Gardner ATT Car Pager |
£59.99 |
 |
|
